Batteries are used in many fields like automobiles, UPS systems, engines, industrial and agricultural equipments, Railways, Telecom, Defence etc. The life of the battery is important in all these sectors, which depends on charge and discharge cycles. Improper charging, overcharging, storage in discharged state cause damage to the battery creating sulphation on plates. The tired battery needs immediate replacement, which may cost heavily & is also unexpected. The sulphation process reduces charge absorption of plates and decreases its storage capacity.
A conventional charger cannot eliminate sulphate crystals from the plates. BattMaster rejuvenater charger produces miraculous effect on tired battery in one charging cycle. The best charging technique supported by 'NASA' is a pulse charging. In BattMaster, a high current pulse is pumped into plates followed by appropriate discharge and rest period. High current BattMaster reacts with the chemicals & produce gasing. Discharge action eliminates gas bubbles from plate surface and the plates are fresh to absorb next charge pulse. This results in sulphate crystals dissolve into acid and the battery capacity is regained. The intelligent BattMaster controls charging as per the battery status and heating. It automatically stops the charging when the battery is charged, avoiding overcharging.
Battery Regenerators, Battery Rejuvenator, Battery Rejuvenator and Maintenance, Battery Reconditioning & Maintenance, Battery Maintenance System, High Frequency Battery Chargers, Battery Dischargers, Battery Maintenance Systems, Annual Maintenance Services, AMC Services, Manufacturer, Supplier, Exporter, Pune, Maharashtra, India.
Battery regeneration is a process that consists of sending high-powered electrical pulses that break down the crystalline layer formed by amorphous lead sulphate. At the end of the process, the lead sulphate from the electrolysis process is converted back into sulphuric acid and the plates are reconstituted. An internal transformer reduces the supply line voltage to the maximum battery voltage, and a software interface controls the current and voltage levels. Photographs of the equipment and its voltage and current waveforms, under load, are provided.
3Batteries are used in many fields like automobiles, UPS systems, engines, industrial and agricultural equipment, Railways, Telecom, Defense etc. The life of the battery is important in all these sectors, which depends on charge and discharge cycles. Improper charging, overcharging, storage in discharged state cause damage to the battery creating sulphation on plates. The tired battery needs immediate replacement, which may cost heavily & is also unexpected. The sulphation process reduces charge absorption of plates and decreases its storage capacity.
A conventional charger cannot eliminate sulphate crystals from the plates.
BattMaster rejuvenator charger produces miraculous effect on tired battery in one charging cycle.
The best charging technique supported by 'NASA' is a pulse charging.
In BattMaster, a high current pulse is pumped into plates followed by appropriate discharge and rest period.
High current BattMaster reacts with the chemicals & produce gasing. Discharge action eliminates gas bubbles from plate surface and the plates are fresh to absorb next charge pulse. This results in sulphate crystals dissolve into acid and the battery capacity is regained.
The intelligent BattMaster controls charging as per the battery status and heating. It automatically stops the charging when the battery is charged, avoiding overcharging.
Revive your old and used batteries with a battery reconditioner. Sulfation of lead-acid batteries is the main reason for capacity loss and battery malfunctioning. With our REPLUS battery reconditioning technology, you can now offer a second life to your batteries. Comparing to a new battery, refurbished batteries may give you a bit less performance. But the condition of a reconditioned battery is good enough to get your work done. However, many car owners prefer to have refurbished batteries as the new ones are expensive. Reconditioned car batteries refer to the process of bringing back the healthy life and charging capacity of your old and dead cells. It will be a total waste to just readily throw your old batteries when you can still recondition it for one to three times. Life span is 1 to 3 yrs. A reconditioned battery requires only a number of repairs and does not require all the cost involved when building a new one. Due to this, the selling price of a reconditioned battery is significantly less than that of a brand new one.
Become a dealer of Energic Plus battery regeneration systems, Interested? Apply Available Market Potential for Battery REJUVENATE Business
Discharging is an important part of battery testing. The time it takes to discharge shows you how healthy your battery is. It lets you know how well it will perform. Monitoring the capacity of your battery helps you manage your future battery replacements and solve problems with any battery-powered equipment that's under-performing.
The Energic Plus Discharger uses regular 220 VAC input to discharge at a constant current of up to 200 A. This allows you to discharge at different rates depending on your type of battery.
Program the discharger to shut down based on: voltage reached, time elapsed, capacity discharged, Of course there are also auto-stop functions to protect your battery from being over-discharged.
Once the discharge is complete, you can process the data that was saved on a USB flash drive in the analyze software integrated monitor program for further analysis. You'll receive a detailed, graphical battery performance analysis in a PDF, Word or Excel file. A special feature lets you easily add your company logo. Here you can see a preview of what the report looks like.
This battery discharger is compatible with the Replus Battery Regenerator but can also be used as a stand-alone discharger. If you use the discharger in combination with the wireless BMS sensors, you'll be able to monitor each cell individually.
Battmaster battery discharger adopted the most innovative High Frequency technology witch is developed by Kad Industries. Industrial UPS, Telecom UPS, Electric Fork lift, Agricultural Machines, Electric lift & Car, Solar & Wind power, Renewable energy etc. available for all kinds of batteries.
Variable Applications - All kinds of 12V to 96V Batteries Using SMPS with switching control Smart control System
Wide Application Range Safety Operation Lowest power consumption
The Battery Maintenance System makes it possible for anyone to perform professional battery maintenance either in a workshop or on the go. With a user-friendly design and a wide variety of easy-to-use features, servicing batteries is a piece of cake, even if you don’t have a background in battery maintenance or management. This portable battery maintenance system combines Energic Plus quality with over a decade of field experience and the latest in power-control technology.
controls discharge voltage, charge voltage and current to protect batteries while servicing and returning them to optimal operating condition. perform a complete restoration process monitor the performance of the individual battery cells safety and alarm functions to ensure absolute safety
When the capacity of a battery is reduced, it is probably due to sulfate crystals that have gradually built up on the electrodes. This prevents the battery from effectively delivering current, because the crystals 'suffocate' the battery.
Lead sulfate increases the internal resistance and decreases the electrolyte density. The process of sulfation build-up is unavoidable. Worse yet, after 3-4 years, the process substantially accelerates (hence the rapid fall of your battery's productivity). If your battery suffers from this type of sulfation, our battery regenerator will be very effective.
Prior to the battery DE sulfation process, it is very important to make sure that the battery, the battery connections and battery box are free of defects. We also need to make sure that the battery surface is neutralized so that sulphation build-up on the connectors doesn’t affect the battery performance. An untreated battery surface may cause leak currents which will have a negative effect on the battery life.
When all connections have been checked and the surface has been treated, we can continue with the regeneration process itself.
